Installing and Configuring the Software
43
Installing Load Balancing/RSL Software
1 From the Installation Options screen select
Product options
.
2 Select
Install a product not listed
.
The following message appears:
3 Press F3.
4 Enter the path to the software:
3C985B_SX:\netware
The following message appears:
5 Press Enter.
The system copies the Load Balancing/RSL software to the
SYS volume.
Configuring Load Balancing/RSL Groups
1 Press Esc to return to the Installation Options screen.
2 From the Installation Options screen, select
NCF files options (create/edit server startup files)
3 Select
Edit AUTOEXEC.NCF file
.
4 Make the following changes to the AUTOEXEC.NCF file:
a
Add a command to load the EL985LB driver before any
commands to load LAN drivers. For example:
load el985lb
load 3C985
Product will be installed from A:\. If you are
installing from floppy, insert the first
diskette of the product you want to install
into the drive and verify that the path above
is correct.
Press <F3> to specify a different path;
Press <ENTER> to continue.
Product “3Com Load Balancing/RSL Server
Software vX.X” was found. Verify that this is
the product you want to install before
proceeding.
Press <ENTER> to continue.
Press <ESC> to abort installation.
Book Page 43 Monday, June 7, 1999 2:14 PM
