36
C
HAPTER
3: W
INDOWS
95/98
AND
W
INDOWS
NT D
RIVER
I
NSTALLATION
3 Make sure that the name of the NIC appears in the list
of network adapters.
If the name of the NIC does not appear in the list of
network adapters, the installation was not successful.
See Chapter 6 for troubleshooting help.
Windows NT 3.51
To verify successful NIC installation on a PC running
Windows NT 3.51:
1 Double-click the File Manager icon.
2 From the
Disk
menu, select
Connect Network Drive
.
The presence of network server names confirms
successful installation.
If you cannot connect a network drive, the installation was
not successful. See Chapter 6 for troubleshooting help.
Installing Multiple NICs
This section describes how to install multiple 3C905C NICs
in a Windows 95, Windows 98, or Windows NT 4.0 PC.
You must use these procedures to install multiple NICs.
Failure to follow these procedures may lead to problems
requiring you to reinstall your operating system.
Windows 95 and Windows 98
To install multiple 3C905C NICs in a PC running
Windows 95 or Windows 98, install and configure
each NIC individually, following these steps:
1 Run the preinstallation program before installing the
NICs in the PC, as described in Chapter 2.
2 Install the first NIC in your PC and connect it to the
network, as described in Chapter 2.
CAUTION:
Do not physically install the second NIC in your
PC until you complete the NIC driver installation for the first
NIC, following the steps below.
3 Turn on the power to the PC and start Windows.
book Page 36 Monday, March 15, 1999 1:31 PM
