4
N
ET
W
ARE
C
LIENT
AND
S
ERVER
D
RIVER
I
NSTALLATION
This chapter describes how to install the Novell NetWare
client driver for DOS, Windows 3.1, or Windows for
Workgroups and the NetWare server driver.
To install the network drivers for Windows 3.1x,
Windows for Workgroups, or DOS in a non-NetWare
environment, see the appropriate text files in the HELP
directory on EtherDisk diskette 3.
To obtain the latest shipping version of a driver, contact
your PC manufacturer.
Installing the NetWare Client Driver
The NetWare client driver enables PCs running DOS,
Windows 3.x, or Windows for Workgroups to access
resources on a NetWare 3.1x or 4.x network.
Use the 3Com Intelligent Auto Install software to install the
client software and drivers for Novell NetWare 3.1x or 4.x.
Do not use the Intelligent Auto Install software if you are
running Windows 95, Windows 98, or Windows NT. See
Chapter 3 for procedures to install network drivers under
these operating systems.
About 3Com Intelligent Auto Install Software
Intelligent Auto Install software automatically configures
your NIC and PC for use as a NetWare client.
The Intelligent Auto Install software creates a
new AUTOEXEC.BAT file and saves the old file as
AUTOEXEC.3CM. It also creates a new CONFIG.SYS
file and saves the old file as CONFIG.3CM.
book Page 39 Monday, March 15, 1999 1:31 PM
