3Com CommWorks 5210, User Manual

Page: 40 / 144

40 C
HAPTER
2: C
ONFIGURATION
Figure 14 Adding Threshold Parameters Window
7 Click Set .
8 If you changed the threshold parameters on the Gatekeeper, SIP Proxy Server,
or any of the Back-end Servers, you must restart the SNMP agent. Refer to
Restarting Other Entities in Chapter 4 for more information.
Editing a Threshold
Parameter
To edit a parameter that is being monitored:
1 Open a console window for the device where the threshold is going to be
edited. (For the Media Gateway, you need to select the edge server card.)
2 From the Configuration menu, click Programmed Settings.
3 Select the 3COM SNMP SubAgent from the Select Entity window (For
Back-end Servers and the Gatekeeper, select 3Com SNMP Agent .) and click
OK .
Figure 15 Selecting an Entity Window