3Com CommWorks 5210 User Manual Download Page 114

Page: 114 / 144

114

PPENDIX

: C

OMMAND

INE

NTERFACE

Tone Test

This section describes how to send and receive a tone test.

Send Tone Test (-S)

The following command causes the modem to send a tone of the specified
frequency, duration, and amplitude.

tcmtone -S[-t][-s

num][-p num]

[freq[hz][

level[db]]]target

Where:

-S

Initiates send tone test.

-t

Leave in test mode after exiting program.

-s

Specifies duration number in seconds. Default = 10.

-p

Specifies time between polls num in seconds. Default = 1.

Freq

Specifies frequency. Must be one of the following: 404, 1004, 2804. Default =
404. If specified, frequency must appear after all other flags and before level
and target.

Optional (ignored). "hz" or "Hz" can be included for clarity.

Level

Specifies amplitude (integer) in dBm. Valid range = 0 to -43. Default = 0. If
specified, frequency must immediately precede level.

Optional (ignored). "db" or dBm" can be included for clarity.

Summary of Contents for CommWorks 5210
















































































































































Search results

Summary of Contents for CommWorks 5210

Reviews:

Related manuals for CommWorks 5210

Brands by name

Popular brands

3Com CommWorks 5210, User Manual

Search results

Summary of Contents for CommWorks 5210

Reviews:

Related manuals for CommWorks 5210

Brands by name

Popular brands