3Com CommWorks 5210, User Manual

Page: 121 / 144

Authorized Station Tool 121
-f filename
The file to save inventory to (for CLI only).
target
Specifies chassis host(s) to be displayed.
The format for target is as follows:
< IP-host>
C an be in IP-dot notation, or a host name that is defined in the host database
or /etc/hosts file.
Authorized Station
Tool
The Authorized Station Tool can be accessed using the following syntax:
[x]tcmauth [-l logfile] [-h] [-c readcomm]
[-C writecomm] target [-q]
[-a ipaddr mask comment | -m ipaddr mask comment |
-d ipaddr]...
Where:
-l logfile
The log file for system diagnostic messages
The GUI log file default is the UNIX syslog file. The CLI default is stderr. You can
reverse these defaults by specifying a "-" (hyphen).
-h
Displays the command line parameters and the descriptions of the parameters
and their flags.
-c readcomm
The SNMP read community string.
-C writecomm
The SNMP write community string.