42
C
HAPTER
4: C
ONFIGURING
THE
A
CCESS
P
OINT
U
SING
A
W
EB
B
ROWSER
5
Make sure the server WWW service is running.
6
Select
Properties-->Service Properties
to display the WWW service properties for
the server. The WWW Service Properties window opens.
7
Select the
Directories
tab.
8
Click
Add
to open the
Directories
dialog box.
9
Type the complete path to the directory created in step one.
10
Select
Virtual Directory
.
11
Type the folder
alias (i.e.,
AirConnectHelp
)
.
12
Click
OK
.
13
Enable the
Default document
option.
14
Type
AirConnectHelp.htm
as the default document and click
Apply
.
15
Click
OK
to exit the window.
Setup Local Workstation Help File Access
To access the Help file from a local workstation, users need to load the Help file on
the hard disk. To install the Help file, run the InstallShield program.
1
Select
AirConnect Firmware & Software Downloads
from the disk or 3Com Web
site at http://support.3com.com.
2
Find and click the APHTMLHelp_Install32_102.exe file. The
Unpacking WAP HTML
Help
window displays indicating that the file is decompressing and the installation
wizard is about to run. The
WAP HTML Help Installation Setup
dialog box displays.
3
Follow the on-screen instructions to install the Help file on the local workstation
hard disk.
To access the Help file located on the local workstation, follow the procedure below.
1
Click Start from the Windows Task bar.
2
Select
Programs-->3Com
(or the directory name created during the installation
process).
3
Click
WAP HTML Help
to launch the help file program.
To exit the Help file, do the following:
1
Click
File
from the Windows menu bar.
2
Select
Close/Exit
.
Accessing the Web Browser UI
Using a Web browser to gain access to the UI requires that the workstation have a
TCP/IP stack and access to a Web browser. The remote station can be on the wired
or wireless LAN.
To verify that the
Web Server
option is enabled for the AP, do the following:
1
Access the UI using a Serial or Telnet connection.
2
Select
System Configuration
.
3
Verify that the
Web Server
option on the
System Configuration
dialog box is enabled.
