3Com 5500-EI PWR, Getting Started Manual

Page: 49 / 118

Viewing Automatically Configured IP Information 43
If the login prompt does not begin immediately, press Return a few times
until it starts.
3 At the login and password prompts, enter
admin
as your user name and
press Return at the password prompt. If you have logged on correctly,
<5500-xx>
is displayed (where
xx
is either SI or EI) as shown in the
example in Figure 16 .
Figure 16 User View Login
4 Enter
display ip interface br
to view a summary of allocated IP
addresses.
The initial set up of your Switch is now complete and the Switch is ready
for you to set up your chosen management method. See
“Methods of
Managing a Switch” on page 30 .
If you do not intend to use the command line interface via the console
port to manage the Switch, you can logout, disconnect the serial cable
and close the terminal emulator software.
DUA1715-0AAA02.book Page 43 Wednesday, March 23, 2005 11:17 AM