3Com 5500-EI PWR, Getting Started Manual

Page: 36 / 118

30 C
HAPTER
3: S
ETTING
U
P FOR
M
ANAGEMENT
Methods of
Managing a Switch
To manage your Switch you can use one of the following methods:
■
Command line interface management
■
Command line interface management using SSH
■
Web interface management
■
SNMP management
Command Line
Interface
Management
Each Switch has a command line interface (CLI) that allows you to
manage the Switch from a workstation, either locally via a console port
connection (see
Figure 7 ), or remotely over the network (see Figure 8 ).
Figure 7 CLI Management via the Console Port
Figure 8 CLI Management over the Network
Refer to “Setting Up Command Line Interface Management” on
page 44 .
There are two main views in the CLI:
User View — this view is shown when you first connect to the Switch
and shows basic information about operation and statistics. The prompt
for user view is
<SW5500-XX>
(where xx is either SI or EI).
System View — this view enables you to configure the system
parameters. To display this view, from user view enter
system-view
.
The prompt for system view is
[SW5500-XX]
.
Console Port
Connection
Workstation
(with terminal emulation
software installed)
Console Cable
Switch
Switch
Workstation
Connect over Network
via Telnet
DUA1715-0AAA02.book Page 30 Wednesday, March 23, 2005 11:17 AM