3Com 5500-EI PWR, Reference Manual

Page: 394 / 1314

1-11
-3 192.168.3.1
Incoming Interface Address: 192.168.4.2
Previous-Hop Router Address: 0.0.0.0
Input packet count on incoming interface: 0
Output packet count on outgoing interface: 0
Total number of packets for this source-group pair: 0
Protocol: PIM
Forwarding TTL: 0
Forwarding Code: No error
Table 1-6 mtracert command output description
Field Description
From last-hop router(192.168.2.2), trace
reverse path to source 192.168.4.1 via RPF
rules Reverse path from the last-hop router
(192.168.2.2) to the multicast source
(192.168.4.1)
-1 5.5.5.8
Outgoing interface address of each hop, starting
from the last-hop router
Incoming interface address
Address of the interface on which (S, G) packets
arrive
Previous-hop router address
IP address of the router from which this local
device receives multicast packets sent by the
source
Input packet count on incoming interface
Total number of multicast packets received on
the incoming interface
Output packet count on outgoing interface
Total number of multicast packets transmitted on
the outgoing interface
Total number of packets for this source-group
pair
Total number of packets from the specified
source forwarded by this device to the specified
group
Protocol The multicast routing protocol in use
Forwarding TTL
The minimum TTL that a packet is required to
have before it can be forwarded over the
outgoing interface
multicast route-limit
Syntax
multicast route-limit limit
undo multicast route-limit
View
System view
Parameters
limit : Maximum number of multicast routing table entries, in the range of 0 to 256.