3Com 5500-EI PWR, Reference Manual

Page: 1254 / 1314

1-24
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot1-tlv { all | port-vlan-id | protocol-vlan-id | vlan-name } | dot3-tlv { all |
link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
location-id | network-policy | power-over-ethernet } }
View
Ethernet interface view
Parameters
all : Sends all the basic LLDP TLVs, all the IEEE 802.1 defined LLDP TLVs, or all the IEEE 802.3 defined
LLDP TLVs; or sends all the MED related LLDP TLVs except location identification TLVs.
basic-tlv : Sends basic LLDP TLVs.
port-description : Sends port description TLVs.
system-capability : Sends system capabilities TLVs.
system-description : Sends system description TLVs.
system-name : Sends system name TLVs.
dot1-tlv : Sends IEEE 802.1 defined LLDP TLVs.
port-vlan-id : Sends port VLAN ID TLVs.
protocol-vlan-id : Sends port and protocol VLAN ID TLVs.
vlan-name : Sends VLAN name TLVs.
vlan-id : ID of the VLAN the TLVs (port and protocol VLAN ID TLVs or VLAN name TLVs) concerning
which are to be sent. This argument defaults to the least protocol VLAN ID.
dot3-tlv : Sends IEEE 802.3 defined LLDP TLVs.
link-aggregation : Sends link aggregation group TLVs.
mac-physic : Sends MAC/PHY configuration/status TLVs.
max-frame-size : Sends maximum frame size TLVS.
power : Sends power via MDI TLVs.
med-tlv : Sends MED related LLDP TLVs.
capability : Sends LLDP-MED capabilities TLVs.
inventory : Sends hardware revision TLVs, firmware revision TLVs, software revision TLVs, serial
number TLVs, manufacturer name TLVs, model name TLVs, and asset ID TLVs.
location-id : Sends location identification TLVS.
civic-address : Inserts the address information about the intermediate device in location identification
TLVs .
device-type : Device type value. A value of 0 specifies DHCP server; a value of 1 specifies switch, and a
value of 2 specifies LLDP-MED endpoint.
country-code : Country code, confirming to ISO 3166.
{ ca-type ca-value }&<1-10>: Configures address information, where ca-type represents the address
information type, in the range 0 to 255, ca-value represents address information, a string of 1 to 250
characters, and &<1-10> indicates that you can enter up to ten such parameters.
elin-address : Inserts telephone numbers for urgencies in location identification TLVs.