8-1
8
Traffic Redirecting Configuration
When configuring traffic redirecting, go to these sections for information you are interested in:
z
Traffic Redirecting Overview
z
Configuring Traffic Redirecting
Traffic Redirecting Overview
Traffic Redirecting
Traffic redirecting is the action of redirecting the packets matching the specific match criteria to a
certain location for processing.
Currently, the following two traffic redirecting actions are supported:
z
Redirecting traffic to the CPU: redirects packets which require processing by CPU to the CPU.
z
Redirecting traffic to an interface: redirects packets which require processing by an interface to the
interface. Note that this action is applicable to only Layer 2 packets, and the target interface
should be a Layer 2 interface.
Configuring Traffic Redirecting
Follow these steps to configure traffic redirecting:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a class and enter
class view
traffic classifier
tcl-name
[
operator
{
and
|
or
} ]
—
Configure the match criteria
if-match match-criteria
—
Exit class view
quit
—
Create a behavior and enter
behavior view
traffic behavior behavior-name
Required
Configure a traffic
redirecting action
redirect
{
cpu
|
interface
interface-type interface-number
}
Optional
Exit behavior view
quit
—
Create a policy and enter
policy view
qos policy
policy-name
—
Associate the class with the
traffic behavior in the QoS
policy
classifier
tcl-name behavior
behavior-name
—
Exit policy view
quit
—
To an interface
Applying the QoS policy to an
interface
—
Apply the
QoS
policy
To a VLAN
Applying the QoS policy to a VLAN
—
