3Com 4200G Series, Getting Started Manual

Page: 53 / 90

Setting Up Web Interface Management 53
For further information on generating a host key on your switch and
transferring keys to the switch using TFTP server, refer to the
Configuration Guide that is supplied with your switch.
Setting Up Web
Interface
Management
This section describes how you can set up web interface management
over the network.
Prerequisites
■
Ensure that you have already set up the switch with its IP information
as described in “Methods of Managing a Switch” on page 37.
■
Ensure that the switch is connected to the network using a Category 5
twisted pair Ethernet cable with RJ-45 connectors.
■
A suitable Web browser.
Choosing a Browser
To display the Web interface correctly, use one of the following browsers
and platform combinations:
Table 11 Supported Web Browsers and Platforms
For the browser to operate the Web interface correctly, JavaScript™ and
Cascading Style Sheets must be enabled on your browser. These features
are enabled on a browser by default. You need only enable them if you
changed your browser settings.
Windows
2000 Windows XP
Windows
Server 2003
Red Hat
Linux 9
Solaris
7/9
Netscape 7.1
✓ ✓ ✕ ✕ ✓
Internet Explorer 5.5
✓ ✓ ✓ ✕ ✕
Internet Explorer 6.0
✓ ✓ ✓ ✕ ✕
Mozilla 1.4
✕ ✕ ✕ ✓ ✓
10014914_AB_Switch 4200G.book Page 53 Tuesday, October 2, 2007 12:13 PM