3Com 4200G Series, Getting Started Manual

Page: 50 / 90

50 C
HAPTER
3: S
ETTING
U
P FOR
M
ANAGEMENT
Figure 21 User View Login
4 Enter
display ip interface br
to view a summary of allocated IP
addresses.
The initial set up of your switch is now complete and you can set up your
chosen management method. See “Methods of Managing a Switch” on
page 37.
If you do not intend to use the CLI from the console port to manage the
switch, you can logout, disconnect the serial cable, and close the terminal
emulator software.
Setting Up
Command Line
Interface
Management
This section describes how to set up command line interface
management using a local console port connection or over the network.
You can configure and manage the Switch 4200G’s port data through its
two user interfaces:
■
Use the AUX User Interface to log in to your switch using the
console port.
■
Use the VTY User Interface to Telnet to the switch. The switch can
have up to five VTY user interfaces.
CLI Management
using the Console
Port
To manage your switch using the command line interface from the local
console port connection, ensure that your workstation is connected to
the console port as described in “Connecting to the Console Port” on
page 42.
10014914_AB_Switch 4200G.book Page 50 Tuesday, October 2, 2007 12:13 PM