3Com 3CRWE62092A, User Manual

Page: 46 / 63

46 C
HAPTER
A: W
INDOWS
NT I
NSTALLATION
W
ITHOUT
N
ETWORKING
I
NSTALLED
5 Check Wired to the network and click Next .
6
When the system prompts to have setup start searching for a network adapter,
click
Select from List .
7
In the Select Network Adapter window, click Have Disk .
8
In the Insert Disk dialog box, make sure that the correct path to your CD-ROM
drive appears in the entry box (for example,
d:
) and click OK .
9
In the Select OEM Option window, select 3Com 3CRWE62092A Wireless LAN PC
Card and click OK .
10
In the Network Setup Wizard window, click Next .
11 In the Network Protocols list, place a check mark next to each network protocol
required for your site and click
Next .
12 In the Network Services window, place a check mark in the box next to each
desired service. Select the default settings and click
Next .
The message, “Windows NT is ready to install networking” appears.
13 Click Next .
The Windows NT Setup windows asks for the location of the Windows NT
installation files.
14
Remove the 3Com CD from the CD-ROM drive, put the Windows NT CD in the
drive, and wait for it to spin up to speed. Make sure that the correct path to your
CD-ROM drive appears in the entry box (for example,
d:
) and click Continue .
Instead of installing from the Windows NT CD, if you have the Windows NT
system files on your computer, you can enter the path to the Windows NT
installation files (for example,
C:\i386
) and click Continue .
The Setup window appears again.
15 In the PC Card Setup window, accept the default settings and click Continue .
The default settings work in most cases. However, you may need to specify values
for your installation.
16
If the Microsoft TCP/IP Properties screen appears, enter the requested information
for your network environment.
Refer to the Windows NT documentation for assistance. If you choose DHCP
server , click Yes at the DHCP prompt. When you are finished entering the
appropriate TCP/IP information, click OK .
17 When the window for enabling or disabling bindings opens, click Next .
18
When Windows NT is ready to start the network, click Next to copy the network files.
19
Enter your computer name and workgroup or domain name when prompted and
click
Next .
20
When the system displays “Networking has been installed on this computer,”
click
Finish .
21
When prompted to restart the computer, remove the Windows NT CD from the
drive, insert the
3Com CD in the drive, and click Yes .