3Com 3CRWDR100A-72 - OfficeConnect ADSL Wireless 11g Firewall Router User Manual Download | Manualshive

Page: 104 / 124

background image

102

A

PPENDIX

D: E

ND

U

SER

S

OFTWARE

L

ICENSE

A

GREEMENT

and developed solely at private expense. The Software is delivered as "Commercial Computer Software" as defined in DFARS 252.227-7014 (June
1995) or as a commercial item as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in this Agreement, which is
3Com's standard commercial license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov.
1995) or FAR 52.227-14 (June 1987), whichever is applicable.

TERM AND TERMINATION:

The licenses granted hereunder are perpetual unless terminated earlier as specified below. You may terminate the licenses

and this Agreement at any time by destroying the Software and Documentation together with all copies and merged portions in any form. The licenses
and this Agreement will also terminate immediately if you fail to comply with any term or condition of this Agreement. Upon such termination you
agree to destroy the Software and Documentation, together with all copies and merged portions in any form.

LIMITED WARRANTIES AND LIMITATION OF LIABILITY:

All warranties and limitations of liability applicable to the Software are as stated on the

Limited Warranty Card or in the product manual, whether in paper or electronic form, accompanying the Software. Such warranties and limitations of
liability are incorporated herein in their entirety by this reference.

GOVERNING LAW:

This Agreement shall be governed by the laws of the State of California, U.S.A. excluding its conflicts of laws principles and

excluding the United Nations Convention on Contracts for the International Sale of Goods.

SEVERABILITY:

In the event any provision of this Agreement is found to be invalid, illegal or unenforceable, the validity, legality and enforceability of

any of the remaining provisions shall not in any way be affected or impaired and a valid, legal and enforceable provision of similar intent and economic
impact shall be substituted therefor.

ENTIRE AGREEMENT:

This Agreement sets forth the entire understanding and agreement between you and 3Com and supersedes all prior

agreements, whether written or oral, with respect to the Software and Documentation, and may be amended only in a writing signed by both parties.

Should you have any questions concerning this Agreement or if you desire to contact 3Com for any reason, please contact the 3Com subsidiary serving
your country, or write:

3Com Corporation, 350 Campus Drive, Marlborough, MA. USA 01752-3064

«
...
102
103
104
105
106
...
»

Summary of Contents for 3CRWDR100A-72 - OfficeConnect ADSL Wireless 11g Firewall Router





























































































































Reviews:

No comments

Related manuals for 3CRWDR100A-72 - OfficeConnect ADSL Wireless 11g Firewall Router

Brand: H3C Pages: 6

OfficeConnect 3CP4144

Brand: 3Com Pages: 4

OfficeConnect 3CP4144

Brand: 3Com Pages: 2

Brand: H3C Pages: 60

Brand: H3C Pages: 149

Brand: 3Com Pages: 27

OfficeConnect 3C19500

Brand: 3Com Pages: 52

Brand: i-MO Pages: 58

Patton SmartNode 2300 Series

Brand: Patton electronics Pages: 2

Brand: Paradyne Pages: 12

RDX QuikStation 4

Brand: Tandberg Data Pages: 2

Brand: Enginko Pages: 19

MultiConnect SE MTS2EA

Brand: Multitech Pages: 2

Brand: Allied Telesis Pages: 80

Brand: Conel Pages: 32

Brand: ExtraHop Pages: 3

SecPath F50X0 Series

Brand: H3C Pages: 41

Brand: NetComm Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands