38
C
HAPTER
5: C
ONFIGURING
THE
R
OUTER
DHCP Clients List
The DHCP Clients List provides details on the devices that have received IP
addresses from the Router. The list is only created when the Router is set
up as a DHCP server. For each device that is connected to the LAN the
following information is displayed:
■
IP address
— The Internet Protocol (IP) address issued to the client
machine.
■
Host Name
— The client machine’s host name, if configured.
■
MAC Address
— The Media Access Control (MAC) address of the
client’s network card.
■
Client Type
— Whether the client is connected to the Router by wired
or wireless connection.
As you connect more devices, the client list will grow to a maximum
number of 253 clients.
From this section of the screen, you can do the following:
■
In the table, check the
Fix
text box to permanently fix the IP address.
■
In the table, click
Release
to release the displayed IP address.
■
Click
New
to allocate an IP address to a MAC address. If you click
New, a screen similar to that shown in
will be displayed.
Enter the required details and click
Apply
to save your settings.
Figure 28
Editing DHCP Clients List Screen
The DHCP server will give out addresses to both wired and wireless
clients.
