background image

304

C

HAPTER

 19: SNMP C

OMMANDS

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the configuration of filters.

show snmp users

The 

show snmp users

 Privileged EXEC mode command displays the 

configuration of users.

Syntax

show snmp users 

[

username

]

Parameters

username

—Specifies the name of the user. (Range: 1-30)

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Console# 

show snmp filters

Name

OID Tree

Type

-----------

--------------------

---

---------

user-filter

1.3.6.1.2.1.1

Included

user-filter

1.3.6.1.2.1.1.7

Excluded

user-filter

1.3.6.1.2.1.2.2.1.*.

1

Included

Summary of Contents for 3CRUS2475 24











































































































































































































































































































































































































































































































































Reviews: