3Com 3CRUS2475 24 Command Reference Manual Download Page 293

Page: 293 / 522

snmp-server host

293

Parameters

■

ip-address

— Specifies the IP address of the host (targeted recipient).

■

hostname

— Specifies the name of the host. (Range:1-158 characters)

■

community-string

— Specifies a password-like community string sent

with the notification operation.

■

(Range: 1-20)

■

traps

— Indicates that SNMP traps are sent to this host. If unspecified,

SNMPv2 traps are sent to the host.

■

informs

— Indicates that SNMP informs are sent to this host. Not

applicable to SNMPv1.

■

— Indicates that SNMPv1 traps will be used.

■

— Indicates that SNMPv2 traps will be used. If

■

port—Specifies the UDP port of the host to use. If unspecified, the
default UDP port number is 162.

■

(Range:1-65535)

■

filtername

— Specifies a string that defines the filter for this host. If

unspecified, nothing is filtered.

(Range: 1-30 characters)

■

seconds

— Specifies the number of seconds to wait for an

acknowledgment before resending informs. If unspecified, the default
timeout period is 15 seconds.

(Range: 1-300)

■

retries

— Specifies the maximum number of times to resend an

inform

request. If unspecified, the default maximum number of

retries is 3. (Range: 0-255)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

Summary of Contents for 3CRUS2475 24











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3CRUS2475 24

Reviews:

Related manuals for 3CRUS2475 24

Brands by name

Popular brands

3Com 3CRUS2475 24, Command Reference Manual

Search results

Summary of Contents for 3CRUS2475 24

Reviews:

Related manuals for 3CRUS2475 24

Brands by name

Popular brands