3Com 3CRUS2475 24, User Manual

Page: 200 / 333

200 C
HAPTER
9: C
ONFIGURING
IP I
NFORMATION
Defining Static
Addresses
The Static Addresses Setup Page contains a list of static MAC addresses.
Static Address can be added and removed from the Static Address Table
page. In addition, several MAC Addresses can be defined for a single
port.
1
Click Wired Ports>Address Tables > Static Addresses . The Static
Addresses Setup Page opens:
Figure 103 Static Addresses Setup Page
The Static Addresses Setup Page contains the following fields:
■
Interface — The specific port or LAG to which the static MAC address
is applied.
■
MAC address — The MAC addresses listed in the current static
addresses list.
■
VLAN ID — The VLAN ID attached to the MAC Address, and a VLAN
called a Routed Interface.Routed Interfaces are the internally-used
VLANs assigned to an port or trunk on which an IP address is
configured.
■
VLAN Name — User-defined VLAN name.
■
Status — MAC address status. Possible values are:
■
Permanent — The MAC address is permanent.
■
Delete on Reset — The MAC address is deleted when the device is
reset.