3Com 3CRUS2475 24, User Manual

Page: 14 / 333

14 S
ECTION
1: C
ONFIGURING THE
W
IZARD
To start the Setup Wizard:
1 Click Device Summary > Wizard . The Welcome to the Setup Wizard
Page opens:
Figure 1 Welcome to the Setup Wizard Page
Step 1 - The Setup Wizard Page contains the following sections:
■
System Parameters — Displays parameters for configuring general
device information. The System Parameters are manually configured in
Appendix 1.
■
System Name — Defines the user-defined device name. The field
range is 0-160 characters.
■
System Location — Defines the location where the system is
currently running. The field range is 0-160 characters.
■
System Contact — Defines the name of the contact person. The
field range is 0-160 characters.
■
IP Configuration — Displays parameters for assigning IP addresses.
Packets are forwarded to the default IP when frames are sent to a
remote network. The IP Configuration parameters are manually
configured in Step 3. The section includes the following fields:
■
Method — Indicates if the IP address has been configured
statically or added dynamically. The possible field values are:
■
Manual — Indicates the IP Interface is configured by the user.