3Com 3CRUS2475 24, User Manual

Page: 219 / 333

Defining Classic Spanning Tree for Ports 219
Defining Classic
Spanning Tree for
Ports
Network administrators can assign STP settings to specific interfaces
using the
Classic STP Summary Page . The Global LAGs section displays
the STP information for Link Aggregated Groups. To assign STP settings
to an interface:
To view Classic STP:
1
Click Policy > Spanning Tree > Classic STP > Summary . The Classic STP
Summary Page opens:
Figure 114 Classic STP Summary Page
The Classic STP Summary Page contains the following fields:
■
Port — The interface for which the information is displayed.
■
STP — Indicates if STP is enabled on the port. The possible field values
are:
■
Enable — Indicates that STP is enabled on the port.
■
Disable — Indicates that STP is disabled on the port.
■
Port Fast — Indicates if Fast Link is enabled on the port. If Fast Link
mode is enabled for a port, the Port State is automatically placed in