3Com 3CBLUG16A - Baseline Switch 2816, User Manual

Page: 39 / 72

Configuring Link Aggregation 39
Modifying Settings and Deleting an Aggregated
Link
Use the Modify/Delete tab to modify the trunk name
and configure flow control and duplex settings of the
aggregated link.
To modify trunk settings:
1
On the Modify/Delete tab, modify any of the following
settings:
■
Name — Allows you to label an interface (up to
characters)
■
Flow Control — Allows automatic or manual
selection of flow control.
■
Speed Duplex – Allows auto-negotiation to be
enabled or disabled. When autonegotiation is
disabled, you can force the settings for speed,
duplex mode, and flow control.
2 Click Apply .
To delete a trunk, click the corresponding Delete check
box, and then click Apply .
Figure 19 Modify/Delete Tab
Viewing the Trunk Summary
If you want to view a summary of the trunk settings,
click the
Summary tab.