14
C
HAPTER
3: I
NSTALLING
AND
C
ONFIGURING
IN
W
INDOWS
8
Click OK.
The Setup Complete screen appears.
If your network environment uses the TCP/IP communications protocol, the
Microsoft TCP/IP Properties dialog box appears. Enter the information needed to
define an IP address. Continue after you have defined the TCP/IP settings.
9
Click Finish to complete the installation.
10
Click Exit.
11
Restart your computer for changes to take effect.
Installing in Windows
2000
Before you begin software installation:
■
Make sure that all software installation requirements are met. See
■
Install the hardware. For instructions, see
Installing and Connecting the NIC on
Use the following procedure to install the driver and diagnostics for the first time
in a computer that is running Windows 2000. (If you are updating a previous
installation, see
Updating Software in Windows on page 16
1
Reboot the computer, start Windows 2000, and log in to the Windows 2000
Administrator account.
The Windows 2000 Found New Hardware wizard detects the new NICs and
begins the driver installation.
2
Insert the
3Com EtherLink Server CD
in the CD-ROM drive.
3
From the main menu, select
NIC Software
.
4
From the list on the left, click
NIC Drivers and Diagnostics
.
5
Follow the Wizard prompts.
6
Choose Typical or Custom Installation.
The
Please Wait
screen appears. After the installation is completed, an Update
dialog box appears.
7
Click OK
The Setup Complete screen appears.
8
Click Finish to complete the installation.
9
Click Exit.
Configuring SHD
Parameter Settings
Follow the procedure for your operating system.
Windows NT
1
Right-click My Network Places and select
Properties
from the menu.
2
In the next window, right-click a connection and select
Properties
from the menu.
3
Click
Configure
.
