3Com 3C980*-TXM User Manual Download Page 18

Page: 18 / 82

HAPTER

2: I

NSTALLING

AND

ONNECTING

THE

NIC

Obtaining Installation

Diskettes

If your computer does not have a CD-ROM drive, access a computer that has a
CD-ROM drive and use the installation utilities to create installation diskettes from
files on the 3Com EtherLink Server CD.

If you do not have access to a computer that has a CD-ROM drive, you can
download the drivers from the 3Com web site:

http://www.3com.com/

Creating Diskettes in

Windows

Use the installation utilities on the

3Com EtherLink Server CD

to create installation

diskettes. The installation diskettes allow you to install drivers, diagnostics,
Dynamic

Access

technology server features, and associated text files. The

installation diskettes do not contain the user guide that is available on the

3Com

EtherLink Server CD

You will need five blank formatted diskettes.

To create the installation diskettes:

Turn on the power to the computer and start Windows.

Insert the

3Com EtherLink Server CD

in the CD-ROM drive.

On the Welcome screen, click on

NIC Software

Click

Installation Utilities

Click on

Create Installation Diskettes

Follow the prompts to copy files to the diskettes.

Summary of Contents for 3C980*-TXM



















































































Search results

Summary of Contents for 3C980*-TXM

Reviews:

Related manuals for 3C980*-TXM

Brands by name

Popular brands

3Com 3C980*-TXM, User Manual

Search results

Summary of Contents for 3C980*-TXM

Reviews:

Related manuals for 3C980*-TXM

Brands by name

Popular brands