Setting Up TCP/IP for Windows and Macintosh
7
2
From the Program manager, click
Network
.
3
From the Network group box, click
Network Setup
.
Figure 9
Network Group Box
4
From the Network Setup dialog box, click the
Drivers
button.
5
From the Network Drivers dialog box, click
Add Protocol
.
6
Select
Unlisted or Update Protocol
and then click
OK
.
7
From the Install Driver dialog box, enter the path to the MS_TCP directory.
For example, if you installed MS TCP on your C: drive in a directory called
MSTCP, you would enter C:\MSTCP.
8
Select MS TCP/IP-32.X and then click
OK
to install.
9
After the installation is complete, click
Close
.
10
Click
OK
.
11
From the MS TCP/IP Configuration dialog box, check the
Auto Configuration
check box and then click
OK
.
12
Restart your PC to allow the changes to take effect.
