LAN Adapter Support, Universal Serial Bus (USB) Ethernet Support Device Driver.
©2003, Jonas Buys.
JBHWIS00001.
www.os2warp.be
OS/2 initialization. If the driver was successfully
loaded, then the message “USB Ethernet driver
installed!” should appear whenever the driver was
loaded correctly. Unfortunately, this option is NOT
really exciting; it doesn’t tell if the USB adapter is
not connected, and it doesn’t produce reasonable
error-handling
messages.
/N:ethName
Driver name can be specified as ethName, where
ethName is required driver's name - USBETHR1,
USBETHR2, USBETHR3 or other. USBETHR driver
defaults drivers name to "USBETHR" or last unused
name in form of "USBETHR" in case "USBETHR"
is already used.
/M:maxNetworkAdapters Specifies the number of network adapters accepted
for
service.
2.4 USB Ethernet Uninstall Instructions
1.
Open MPTS - Network Adapters and Protocol Services (click right mouse
button on desktop, select
System Setup
menu, double click on MPTS
icon in System Setup window).
2.
Press
Configure
button.
3.
See FIGURE1. Select
LAN adapter and protocols
and press
Configure
button.
4.
Select all protocols associated with USB Ethernet adapter in
Current
Configuration
adapter list, press
Remove
button for each protocol.
Confirm that you want to delete the protocol when a confirmation dialog
box appears.
5.
Then all the attached protocols are removed from the network cards you
want to remove, select the
USB ETHeRnet
adapter in
Current
Configuration
adapter list, press
Remove
button. Confirm by clicking
