LAN Adapter Support, Universal Serial Bus (USB) Ethernet Support Device Driver.
©2003, Jonas Buys.
JBHWIS00001.
www.os2warp.be
OK
in the confirmation dialog box.
6.
Press
OK
button to close
Adapter and Protocol Configuration
dialog.
7.
Press
Close
button to close
Configure
dialog.
8.
Press
Exit
button to close MPTS utility.
9.
Reboot the operating system.
3. Listing of Tested USB Ethernet Adapters
IBM only tested three devices that work with this driver. Officially this is stated
by Big Blue:
These devices work, of course, but there are many more USB network adapters
that work great with this device driver! In the following table, you’ll find a list of
USB Ethernet devices that have been tested thoroughly for the OS/2 Warp
Compatible Hardware List Project. You can get support for the three devices tested
by IBM directly with IBM Costumer Support, but they will refuse to help you for other
devices. Should you have any hardware troubles with those network cards, browse
to the OS/2 Compatible Hardware List webpage and there you will find support.
In the following table, you will find the compatible devices and their
respective Vendor and Product IDs:
Adapter
Vendor ID
Product ID
3COM USB network interface 3C19250
0x0506
0x03e8
3COM HomeConnect Ethernet USB adapter
0x0506
0x11f8
The USB Ethernet Adapter Driver provides OS/2 support for
selected chip sets that meet the USB 1.0 or USB 1.1 specification.
OS/2 USB Ethernet support is limited to adapters based on
Kawasaki LSI KL5KUSB101 chipset. Support software was tested
on 3COM USB Network Interface (3C19250), D-Link Corp. USB
Ethernet Adapter (DSB-650) and ADS Technologies Inc. USB
Ethernet Adapter (USB-10BT).
