Visiondome HD Installation Manual V2.1.29
Page 23
© 360 Vision Technology Ltd.
6.4 Maintenance
• Camera - Cannot be edited, shows label/name given to the camera.
(See Video - Camera - page 10).
Version
•
Firmware - Current firmware loaded onto the camera.
•
Kernel - Current kernel file loaded onto the camera.
• Bootloader - Current Bootloader loaded onto the camera.
• Hardware - Current mainboard software loaded onto the camera.
• Serial Number - Serial number of the product.
• Product Version - Shows which product version the camera is.
Parameters and Settings
• Backup Settings - Save - Used to save the camera settings.
The file is displayed as Visiondome_HD_YYYYMMDD_HHMM.DAT clicking on this file will download
the file to the PC download folder.
•
Restore Settings - Browse to the required DAT file and then click restore. The camera will then apply
the settings and reboot the camera.
PLEASE note:- All saved camera settings including passwords will be uploaded to the camera.
• Reset Settings
• Default Parameters - Reset codec parameters i.e. video stream settings.
• Factory reset - This will reboot the camera and all the settings, except IP address will be lost.
Camera Maintenance
• Camera reboot
• Soft reboot - This will reboot the codec, no settings will be lost.
• Hard reboot - This will reboot the camera, no settings will be lost.
•
Firmware Update - Browse to codec file and then click on update. The camera codec will then be
updated. The Visiondome-HD camera will re-boot once the update has been performed.
DO NOT
interfere with this process as it may stop the camera from working.
Contact 360 Vision Technical Support for the link to the codec update files.
