Visiondome HD Installation Manual V2.1.29
Page 10
© 360 Vision Technology Ltd.
6.2 Settings
6.2.1 Video
The Video page, offers options to setup:-
• Camera - Add or edit the camera name.
• Stream Type - Choice of single or dual video streams.
• Codec - Choose which compression format the stream will use.
(See page 28 for table of options).
• Resolution - Set what resolution the stream will use.
(See page 28 for table of options).
Stream Tabs, offer options to:-
•
Framerate - Configure how many frames per second (fps) the stream uses.
(Also see Camera - Sensor Frame Rate - page 15).
•
Bit Rate - Set the bit rate that the stream will use. Type in figure in Kbps.
(E.g. 4000Kbps is 4Mbps)
•
Rate Control - Configure the rate control of the stream, choices are VBR (Variable), CBR (Constant)
and CVBR (Constrained Variable, limited to 8Mbps).
Overlay options
• Date - Selecting this option will show the date as text on the video stream.
(See Date/Time - page 19).
• Time - Selecting this option will show the time as text on the video stream.
(See Date/Time - page 19).
• Text - Selecting this option will show the selected text on the video stream. Positions available are top
left or right of the image.
• Detailed Info - This will show the information about the stream on the video.
• Custom A - Used to enable the option to display text when the camera is operated. See options for
text selections below. Text will be shown on top line of video.
(See PTZ zones - page 18).
• Custom B - Used to enable the option to display text when the camera is operated. See options for
text selections below. Text will be shown on second from top line of the video.
(See PTZ zones - page 18).
Text selections available are
• User - For SDK use.
• Zone - Used to show text that has been programmed into the camera setup.
(See PTZ zones - page 18).
• PTZ Status - Shows camera PTZ co-ordinates.
• Camera Status - Shows the current state of the camera, what focus, iris and sensor mode the
camera is in.
