Visiondome HD Installation Manual V2.1.29
Page 14
© 360 Vision Technology Ltd.
• Seek - Use this to test the preset.
•
Define - Use this to set/define the preset.
• Delete - Use this to delete/remove the preset.
Mimics
When a mimic tour is started, the Visiondome-HD will perform all the actions which were defined when the
mimic was programmed. Upto four mimic tours can be defined.
• Play - Starts the selected mimic tour.
• Start - Use this to start programming a mimic tour. Move the camera, seek presets and/or use the
lens to define the actions to be saved for the mimic.
• Stop - Use to end the programming of the mimic tour into the Visiondome-HD.
The mimic and preset tours will repeat continuously until manually interrupted either by an alarm or user
intervention.
Tours
A tour of presets is stored in the Visiondome-HD as a list of tour points. Each tour point consists of a preset
number, the dwell time for which the Visiondome-HD will pause and the speed parameter that will be used to
seek the preset. Each of the four tours of presets can contain between 2 and 90 points.
When programming a tour of presets it is necessary to first store all the required presets into the Visiondome-
HD and to define the required dwell times and speeds of travel that you will require the Visiondome-HD to use
when the tour is started.
A maximum of four individual tours of presets can be stored in each Visiondome-HD. Each tour can have
between 2 and 90 points, each point can be a preset in the range 1 to 360. Different points can use any preset
number, including repeats of ones that have been used before. The speed that the camera will travel at to reach
the preset can be in the range 1°/sec (slowest) to 100°/sec (fastest). To seek the preset at maximum speed, set
speed to 0. The delay (dwell) at each point is defined in seconds, range 1 to 100.
• Play - Starts the selected preset tour.
• Add - Use to add a new point to the tour.
• Final - Use to indicate that this point is the last point in the tour.
Privacy Zones
A privacy zone can be used to obscure a scene with in an image e.g. private residence.
Use the drop down box to select the privacy zone preset 1 to 24. Move the camera so that the scene to be
obscured is in the centre of the image. Use zoom to set the size of the privacy zone.
•
Define - Defines the image as a privacy zone preset.
• Seek - Seeks the selected privacy zone preset.
• Enable - Sets the selected privacy zone preset as a privacy zone.
• Disable - Disables the privacy zone of the selected privacy zone preset.
Up to eight privacy zones can be viewed at the same time. The privacy zone feature is not available when the
camera is within 20° of the camera pointing vertically up or down.
Home Function
The camera will perform an action (goto preset, start preset or mimic tour), after a period of inactivity.
• Home Action - This sends the camera to a preset, tour or mimic.
• Home Number - This sets the preset, tour or mimic the camera will go to/start.
• Home Timer - This sets the time for the period of inactivity.
