360 Vision Predator, Installation & Configuration Manual

Page: 51 / 56

29
Special Presets
Seek64 IR Seek66
Illumination
(On) (Mono/Colour not changed)
(Off)
(VVhen it is dark)
Seek65 White Lights Seek66
(On) (Mono/Colour not changed, no timer)
(Off)
Night Sensor Seek67 Seek68
(VVhen it is dark) (Mono)
(Colour)
Night Focus Range Seek69
Seek 70
(VVhen it is dark) (Ambient)
(IR)
Seek 81 Double Wipe
Seek82 Permanent Intermittent Wipe
Wiper
Seek83 Permanent Fast Wipe
Seek86
Seek84 limed Intermittent Wipe
(Stop)
Seek85 Timed Fast Wipe
De-Fog
Seek87 Seek88
(On)
(Off)
Washer
Seek 89
Define Preset 299
Seek 90
(On) (Defines Washer Position)
(Off)
White Lights Seek 100 White Lights Seek 101
(VVhen it is dark) (On) (Change to colour, timer used)
(Off)
Power on Park Define/Seek 150 Program/Recall Power on Park preset position
30 Important - Care of Painted Surfaces
The powder coating applied to the Predator external housing is recognised as being in the forefront for
quality and finish. However, in order to preserve the aesthetic finish it is recommended that the coating is
regularly cleaned.
Regular cleaning on a maximum three month interval, using warm and mild detergent must be undertaken.
Abrasive cleaners including strong solvent must NOT be used at any time.
In areas where the coating may come in contact with concentrated atmospheric pollutants [marine, chemical
and especially bird droppings] it would be prudent to clean more frequently e.g. monthly.
Full documentation of the cleaning schedule MUST be maintained to ensure that a warranty claim can be
considered.
If damage occurs to the coating (e.g. the Predator is dropped, scrapped etc.), repairs MUST be carried out
immediately.
When the Predator is installed in areas where there is a high risk of damage from birds or their droppings,
additional precautions and measures should be used to keep the birds away from the Predator e.g. fit anti­
bird spikes.
Predator Installation Manual V10_1_29_00 Page 51 of 56
© 360 Vision Technology Ltd