360 Vision Predator, Installation & Configuration Manual

Page: 44 / 56

Set Time
The Datemme page, offers options to:-
• Set Manually - Input time/date manually.
• Synchronize with Computer Time - Put a tick in the button and then click OK, to apply the local
computer date/time to the camera.
• Synchronize with NTP Server - Put a tick in the button and then click OK, to apply the local server
date/time to the camera.
•
NTP Server - Input the address of the time server required, default is pool.ntp.org.
Timezone
• Time Zone - Select time zone to suit the location of the camera/system.
OK to program the new settings into the Predator.
Cancel to abandon the changes to the settings.
23 Network
• !;'. 360 Vi�ion T�hnology Limhll )C
+
-
0 X
CD II 192.168. 1 .1 57 /k>gon.html•
l!l
"" \'Ill U
Q. Search
Camera - Cannot be edited, shows label/name given to
the camera. (See Video - Camera - page
36
)
II\ ID -
Network
The Network tab, offers options to:-
NTP
DHCP Enable -Allows the camera to be set using a dynamic IP address.
IP Address - Input a static IP address, if DHCP is not used.
Netmask - Input the Network Subnet Mask.
Default Gateway - Input the Network Gateway.
• Primary Name Server - Input the Domain name server, if required.
• MTU Size -Option to change the MTU size, default is 1500 bytes.
• MAC Address - Displays the camera MAC address.
• Default Recovery - Inhibit Multiple Power Cycle Method, disables the Network recovery process
(See Network Settings Recovery - page 50 )
NTP Server - Input the address of the time server required, default is pool.ntp.org.
Predator Installation Manual V10_1_29_00 Page 44 of 56
© 360 Vision Technology Ltd