360 Vision Predator, Installation & Configuration Manual

Page: 18 / 56

5 Predator Washer/Nozzle Bracket
Nozzle bracket.
The Predator washer bracket kit includes the bracket, nozzle M8 plain metal washer, M8 lock washer and four
cable ties.
Nozzle Adjustment
The nozzle is set to produce a vertical water jet. The direction of the jet can be adjusted by rotating the nozzle
body in the bracket, or by using the screw-driver slot.
Fixing Bracket to Predator
Choose one of the four M8 Predator fixing bolt positions to be used to mount the nozzle bracket so that it does
not obscure an important view. E
. g. directly above the horizontal bar of a wall bracket would be suitable.
Fit an M8 flat metal washer between the Predator base and the nozzle bracket so that the base of the bracket
is not crooked. Fit an M8 lock washer under the head of the bolt to reduce the risk of the bolt becoming loose
and the bracket moving. Ensure that the curved end of the bracket fixing plate is directed towards the Predator
pan shaft so that the vertical part of the bracket is the maximum distance from the rotating body.
Tube Connection
Suitable tube (not supplied) for connection to the nozzle is PVC with internal diameter 3mm and outside
diameter 6mm PVC.
The end of the tube is pushed over the ridged tube at the rear of the nozzle. Fit a cable tie around the joint
between the PVC tube and the rear of the nozzle to ensure that the tube cannot become detached.
The PVC tube should weave through the two slots in the bracket to provide strain relief. Cable ties can be used
to secure the tube so that it is clear of the Predator's rotating body
. Take care that the cable ties do not cause
excessive restriction of the tube.
Water Jet direction (vertical)
Adjustable Nozzle
Tie
Tube
Nozzle Bracket located
Fit M8 Plain Washer Between Nozzle
Bracket and Predator Mounting
Base.
Predator Installation Manual V10_1_29_00 Page 18 of 56
© 360 Vision Technology Ltd