Page 32
MAXX-1200 Owner’s Manual
The Transport Channel View
The Transport Channel View is shown in Figure 2. This is the default view of each channel.
Basic transport operations such as
play
,
stop
,
record
, and
head/tail trimming
appear in the Clip
Transport window for each channel. These operate in familiar VTR fashion.
Figure 2 - Transport Channel View
Transport Menu Bar
There are two menus,
File
and
Options
.
File Menu
New
Channel 1 only. Opens the Clip Navigator to allow naming of a new clip, then prepares the
channel for recording. See page 41.
Key Command –
Ctrl+N
.
Open
Opens the Clip Navigator to allow choosing a clip to load into the transport.
Key Command –
Ctrl+O
.
Save
Saves an edited clip using its existing file name.
Key Command –
Ctrl+S
.