Page 54
MAXX-1200 Owner’s Manual
Disable Network [X]
This selection turns the network access OFF or ON. The default is Disabled (the box is checked).
To Enable the network connection, click the box to un-check it. Disabling the network can be
used to deny access to the server from the network for security purposes.
Enabling/Disabling DHCP [X]
Enabling DHCP will configure the network interface automatically. The IP Address that is
assigned will be displayed in the top line of the main GUI Window.
If the
DHCP
box is not selected, the user may then manually enter assignments in the
following windows:
•
IP Address
( Example: 192.168.1.20 )
•
Net Mask
( Example: 255.255.255.0 )
•
Default Router
( Example: 192.168.1.1 )
The Host Name and NTP domain name may be a fully qualified domain name, such as
edit1.mydomain.com, or a properly formatted IP address. All other manually configured
addresses must be properly formatted IP addresses.
Saving Network Configuration
Click on
OK, APPLY
, or
CANCEL
to accept or abandon new entries.
The IP address of the system is displayed in the upper-left corner of the GUI at the end of the
main window title.
The server is designed to be used in a private dedicated video network. A firewall must be
used in systems that require internal security or connection to public networks.
Consult with a network security specialist for guidance on the best hardware, programming
and practices for your facility’s requirements.
