2N IP Force 9151101CHKW, Installation Manual

Page: 110 / 118

Installation manual 2N® IP Force
110 / 118
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MJPEG
Low quality: QVGA (320 x 240), 10 fps, quality 70: 435 kbps with headers
Medium quality: VGA (640 x 480), 15 fps, quality 85: 506 kbps
High quality: SXGA (1280 x 960), 15 fps, quality 95: 8 Mbps
Interface
Power supply: 12 V ±15 % / 2 A DC or PoE
PoE: PoE 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX s Auto-MDIX, RJ-45
Recommended cabling: Cat-5e or higher
Supported protocols: SIP2.0, DHCP opt. 66, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog, ONVIF
Passive relay switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Active switch output : 9 up to 13 V DC depending on power supply (PoE: 9 V; adaptor: power supply voltage
minus 1 V), max 600 mA
RFID card reader
Optional
Includes besides card reader itself: Wiegand interface, tamper switch, active output, relay, two inputs
Supported cards on 125 kHz version, Part No. 9151011
EM4100, EM4102
Supported cards on 13.56 MHz version, Part No. 9151016 (only card serial number is read)
ISO/IEC 14443A
Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
ISO/IEC 14443B
CEPAS, HID iCLASS
JIS X 6319
Felica
Supported cards on 13.56 MHz NFC version, Part No. 9151017 (only card serial number is read)
ISO/IEC 14443A
Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
ISO/IEC 14443B
CEPAS, HID iCLASS
JIS X 6319
Felica
ISO/IEC 18092
SmartPhone with NFC/HCE support, since Android version 4.3
Supported cards on secured 13.56 MHz NFC version, Part No. 9151019 (optionally card serial number or
PAC ID is read)
ISO/IEC 14443A
Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight C
ISO/IEC 14443B
CEPAS, HID iCLASS
JIS X 6319
Felica
ISO/IEC 18092
SmartPhone with NFC/HCE support, since Android version 4.3
Wiegand Interface: Input/Output mode, located on RFID card reader module
Active switch output: 9 up to 13 V DC depending on power supply (PoE: 9 V; adaptor: power supply voltage
minus 1 V), max 600 mA
Passive relay switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Additional switch