2N ATEUS, User Manual

Page: 43 / 58

41
DISA do GSM
- Password – Access password, which the GSM gateway will request before
dialling an outg. number to a GSM network (at first the gateway sends a special dial
tone – for password, after the passord if correctly entered the gateway sends a
normal dial tone). To finish the access procedure you
have to send to the gateway
char „ # “
- First digit waiting time is the time during which the calling subscriber gets the
DISA message and should transmit the first DTMF tone. If no number is detected
during the timeout, the operator is dialled-in if activated, if deactivated, the caller gets
the busy tone
- Next digit waiting time is the time of waiting for the second and further digits of
the direct dial number. If the next number is not detected during this timeout, gateway
start to dial received number to GSM network.
-
Unknown CLIP enabling – In case that this parameter will be disabled, the GSM
gateway will start rejecting all requests for calls from calling parties with disabled
CLIPs (e.g. with active CLIR function).
- Enable only for CLIP tab numbers. – In case that you activate this parameter, the
GSM gateway accepts the request for a call only from calling parties with CLIP included
in table „CLIP routing“. In case that this CLIP isn’t in the table the gateway rejects such a
call.
SMS at no anwer
This parameter activates the following function: In case that an outgoing call from GSM
gateway won't be connected (only rings for a defined time period), the gateway will send
an SMS to the same number with predefined text message. In this text you can use
chars %N, these chars will be replaced by MSN number of calling party. Please, write
text without special chars, lenght of message is restricted to 150 chars.
International local prefix
this parameter replaces the international country prefix (code) in every incomming call
from the GSM network) (see. 6.5.4.5 page 45 and 6.5.3.1 page 35)
Validity (hours)
Validity of line in Auto Routing CLIP function. After this time the line will be automaticly
deleted-
Erase after using
In case that some line in Auto Routing CLIP table will be used (somebody call back to the
GSM gateway), this line will be deleted.
Store connected call
In normal mode the gateway store only unconnected call (only ring) to Auto Routing CLIP
table. In case that you will activate this parameter the gateway will store all outgoing calls
(uncoconnected)