2N ATEUS, User Manual

Page: 12 / 58

10
Hang up.
To enter PUK (use if you have confused three times or forgotten the PIN):
Procedure Description of steps
Pick up the earpiece, dial the service prefix (default
), dial (PUK entering service).
or Press or to select GSM 1 or GSM 2 module.
PUK
Enter the PUK. If it is shorter than eight digits, then press
to quit
PUK
Re-enter the PUK.
Hang up.
* Entering PIN and PUK codes you are guided by voice instructions.
Setting GSM services (voice box, routing)
Before you install the SIM card you have to decide whether you want to use the incoming
call routing services provided by GSM networks (in case of busy line, absence,
unavailability…). In connection with a PBX it is usually convenient to switch all routing off
(especially to the provider’s voice box) and use your own voice box. If you have more GSM
gateways with one PBX, you can route calls from one gateway to another in case one of them is
engaged. (Activation and deactivation of different call forwarding modes is more advantageous
with the SIM card inserted in a standard GSM telephone).
Setting roaming parameters (calling via foreign GSM networks)
ATEUS
®
- GSM ISDN GATEWAY Lite is pre-set by the manufacturer with switched off
roaming (it can be set in the configuration program – see 6.5.3.1 page 35). You hardly ever
travel with the ISDN GSM gateway and in border areas roaming would represent a risk that e.g.
in case of a local service failure the gateway would log in a foreign network and the price of
calls would rise significantly. If you want to authorise roaming and prefer some networks, fill in a
list of preferred GSM networks by means of a mobile phone and then, when programming the
GSM gateway do not forget to authorise roaming.