2N ATEUS, User Manual

Page: 28 / 58

26
Fig.23: Setting communication of gate and PC
6.3. Connecting ATEUS
®
- GSM ISDN GATEWAY Lite to your PC
To set parameters you must first establish
communication with the gateway after starting the
program. To establish the communication correctly
you
should use the MENU “ Setting >
Communication “. The basic setting is shown in fig. 23.
More detailed information see 6.4.4.
To connect the gateway and establish mutual
communication with your PC you should use the
MENU “
Gateway
>
Connect gateway “, or the icon
“Connect gateway“ in the button bar:
Select the “Use Modem” function only in connection with remote gateway supervision
using a connected ISDN modem. Into the “initialisation” input box fill in the AT command that is
used to switch on data communication for the particular modem x72 (x75) transparent.
Note : If your have more gateways, refer to 6.4.2 to establish communication with the gateway.
6.4. Main menu and button bar
The following menus are available here:
File – for physical work with the configuration file;
(storing, reading, etc. – see 6.4.1 below).
Gateway – for physical operations with the gateway or more gateways;
(connecting, disconnecting, etc. – see 6.4.2 below).
Gateway control – entire command operations with the gateway;
(diagnostics, reset, DISA etc. – see 6.4.3 below).
Setting – contains items for communication setup and language selection;
Help – contains items for work with the help.