2N 01368-001, Installation Manual, Page: 92 / 107

2N Access Unit Installation Manual
92 / 107
•
•
Function:
The 2N
®
IP Security relay is a device installed between the access unit (outside the secured
area) and an electric lock (inside the secured area). The 2N
®
IP Security relay includes a relay
that can only be activated if the valid opening code is received from the access unit.
Specifications:
Passive switch: NO and NC contacts, up to 30 V / 1 A AC / DC
Switched output:
Where the security relay is fed from the intercom, 9 to 13 V DC is available on the output
depending on the power supply (PoE: 9 V; adapter: source voltage of minus 1 V) / 400 mA
DC.
Where the security relay is fed from an external power supply, 12 V / 700 mA DC is available
on the output.
Dimensions: (56 x 31 x 24) mm
Weight: 20 g
Installation:
The 2N
®
IP Security relay is installed onto a two-wire cable between the access unit and the
electric lock inside the area to be secured (typically behind the door). The device is powered and
controlled via this two-wire cable and so can be added to an existing installation. Thanks to its
compact dimensions, the device can be installed into a standard mounting box.
Connection:
Connect the 2N
®
IP Security relay to the 2N Access Unit as follows:
To the active output (OUT1 or OUT2)
Connect the electric lock to the 2N
®
IP Security relay as follows: