2N Telekomunikace 2N Access Unit 916009, Installation Manual

Page: 62 / 70

62
2N TELEKOMUNIKACE a.s., www.2n.cz
®
4. Technické parametry
Audio
Speaker: 0.8 W / 8 Ω
Interface
Power supply: 12 V ±15% / 2 A DC (3 A if there is a larger number of modules)
and/or PoE
PoE: PoE 802.3af (Class 0 - 12.95W)
LAN:: 10/100BASE-TX with Auto-MDIX, RJ-45, connecting block or pigtail RJ-45
Recommended cabling: Cat-5e or higher
Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
Passive switch: make and break contact, up to 30 V / 1 A AC/DC
Active switch output: 8 to 12 V DC according to power supply (PoE: 10 V;
adapter: source voltage minus 2 V), up to 400 mA
is part of the Tamper switch 2N Access Unit
®
Inputs: passive / active mode (-30 V to +30 V DC)
OFF = open or U > 1.5 V
in
ON = short-circuit or U < 1.5 V
in
RFID card reader
Frequency: 13.56MHz & 125kHz
Supported 13.56MHz cards:(card serial number is only read)
ISO14443A: Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, SmartMX,
Ultralight, Ultralight C, SLE44R35, my-d move (SLE66Rxx), PayPass, Legic
Advant
ISO14443B: Calypso, CEPAS, Moneo, SRI512, SRT512, SRI4K, SRIX4K,
PicoPass, HID iCLASS
JIS X 6319: Felica
ISO 18092 (NFC support): SmartPhone with NFC/HCE support, Android
version 4.3 and higher
Supported 125kHz cards: EM4100, EM4102, HID Prox