2N Telekomunikace 2N Access Unit 916009, Installation Manual

Page: 53 / 70

53
2N TELEKOMUNIKACE a.s., www.2n.cz
®
125kHz RFID Card Reader Module
The 125kHz RFID card reader module ( ) is one of the Part No. 9155032 2N
®
Access
elements and is used for reading RFID card Ids in the 125 kHz band. Unit
The module contains two bus connectors for 2N
®
Access Unit
These two connectors are fully interchangeable and can be used either as inputs
from the basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
EM4100, EM4102, HID Proximity
13.56MHz RFID Card Reader Module
The 13.56MHz RFID card reader module ( ) is one of the Part No. 9155033 2N
®
elements and is used for reading RFID card Ids in the 13.56 MHz band. Access Unit
The module contains two bus connectors for 2N
®
Access Unit
These two connectors are fully interchangeable and can be used either as inputs
from the basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
ISO 14443A
Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, Ultralight, Ultralight
C
ISO 14443B
CEPAS, HID iCLASS
JIS X 6319
Felica
I/O Module
The I/O module ( ) is one of the elements and is Part No. 9155034 2N
®
Access Unit
used for extending of the number of inputs and outputs.
The module contains two bus connectors for 2N
®
Access Unit
These two connectors are fully interchangeable and can be used either as inputs
from the basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes an 80 mm long interconnecting cable.
The
inputs / outputs are addressed as follows:
, e.g. module5.relay1. Configure the <module_name>.<input/output_name>