2N Telekomunikace 2N Access Unit 916009, Installation Manual

Page: 59 / 70

59
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2.5 Dokončení montáže
Mounting Completion
Check the connection of all wires and the RJ-45 plug to the pigtail (adapter) connected
to the motherboard.
Frame Mounting
Check the frame sealing before fitting the frame.
Version A
Screw the flush mounting frame in the upper and bottom parts.
Version B
Hang the wall mounting frame on the hook in the upper part and then screw it tight in
the bottom part.
Most Frequent Mounting Errors
At first, mount the metal bolts, level the bases on an even surface and tighten the
screws.
The examples in the figures below show incorrectly assembled bases. This happens, in
particular, where the screws are tightened first.
Caution
Make sure that the terminals of all the unused connectors are tightened
properly to avoid sound vibrations.
Caution
Improper mounting may deteriorate the waterproofness. 2N Access Unit
®
Water infiltration may damage the electronic part.
Make sure that all the holes are filled with some waterproof material – the
top part, around the cables and the screws.
Use silicone or some other sealant to seal the box against the wall if
uneven to avoid water leakage and wall damping.
Caution
Make sure that the bases are levelled properly to avoid water leakage and
electronic damage.