2M Technology 2MN-6004-P4-E User Manual Download Page 108

Page: 108 / 131

100

Click

Apply

to save the settings.

ONVIF Authentication

Enable ONVIF authentication under

System

Security

ONVIF Auth

a username and password will be required for ONVIF-based device

access.

Select the check box and then click

Apply

ARP Protection

ARP protocol is used to associate an IP address to a hardware MAC

address. ARP attacks mainly occur on LAN, in which attackers use forged

IP and MAC addresses. APR protection prevents this kind of attacks by

verifying the gateway's MAC address in all access requests.

Note that changing the NIC working mode will disable ARP protection

automatically.

Click

System

Security

ARP Protection

Select the desired NIC and then select

Enable ARP Protection

Summary of Contents for 2MN-6004-P4-E




































































































































Search results

Summary of Contents for 2MN-6004-P4-E

Reviews:

Related manuals for 2MN-6004-P4-E

Brands by name

Popular brands

2M Technology 2MN-6004-P4-E, User Manual

Search results

Summary of Contents for 2MN-6004-P4-E

Reviews:

Related manuals for 2MN-6004-P4-E

Brands by name

Popular brands