1010music Blackbox Page 95 User Manual Download

Page: 95 / 106

To Send MIDI Notes from a Sequence to an External MIDI Device:

Connect your MIDI device to the blackbox MIDI TRS Output jack and configure it

to use the desired MIDI channel.

Create a sequence you want to use to drive the MIDI device. You can use any

WAV file in the pad used to play the sequence, and then mute the pad on the

Mix screen if you don’t want blackbox to generate sound for that pad.

Push

SEQS

and select the sequence you want to use to drive the MIDI device.

Push

INFO

until you see the parameters screen with the

MIDI Out

parameter.

Set the

MIDI Out

parameter to the MIDI channel used by the MIDI device.

Activate the sequence and push

PLAY

on blackbox. Blackbox will now send the

note events from the configured sequence to the MIDI device.

To Send MIDI Notes from a Pad to an External MIDI Device:

Connect your MIDI device to the blackbox MIDI TRS Output jack and configure it

to use the desired MIDI channel.

Configure a pad you want to use to drive the MIDI device. You can use any WAV

file in the pad, and then mute the pad on the Mix screen if you don’t want

blackbox to generate sound for that pad.

Push

PADS

and select the pad you want to use to drive the MIDI device.

Push

INFO

twice and then touch

MIDI

at the bottom of the screen to bring up

the MIDI parameters for that pad.

Set the

MIDI Out

parameter to the MIDI channel used by the MIDI device that

will receive the signal.

Trigger the pad on the blackbox by touching the pad, or playing it in a sequence.

Blackbox will now send the note events from the configured pad to the MIDI

device on the same MIDI channel.

NOTE:

►

You can configure more than one sequence and pad to send MIDI out

on the same channel.

►

Blackbox does not send out or pass through MIDI Program Change

messages.

Page 95 of 106

Blackbox User Manual 1.7

Summary of Contents for Blackbox











































































































Search results

Summary of Contents for Blackbox

Reviews:

Related manuals for Blackbox

Brands by name

Popular brands

1010music Blackbox, User Manual

Search results

Summary of Contents for Blackbox

Reviews:

Related manuals for Blackbox

Brands by name

Popular brands