1010music Blackbox User Manual Download

Page: 84 / 106

TOOLS

The Tools screen is the home for global parameters that apply across
presets. This is where you can adjust the Headphone volume and
control the metronome. Push

INFO

or touch the page buttons along

the bottom of the screen to cycle through the available parameter
pages. Turn a knob to adjust the value of the nearest parameter.

Settings on the Tools Screen:

Tools Screen

Page

Parameter Description

Main

Brightness

Controls the brightness of the display screen.

Headphone

Controls the volume of the signal going to the headphones.

Compressor

When set to

, blackbox will apply a compressor to the signals sent to Out 1.

Rec

RecToPlay

When set to

, blackbox will automatically start to play the new sample when

recording ends if the

Length

parameter was used for recording.

RecConfig

When set to

Global

, changes made to recording settings on the Pad Loading

and Recording screen will apply to all empty pads.

When set to

Per Pad

, these changes only change the current pad and do not

change what is used for other empty pads. Use

Per Pad

when you want to set

up a Template preset with different recording configurations for each pad.

Lead In

When set to

, blackbox will wait 4 beats before recording begins. It will

display the count down as a negative number in the measure counter in the top

left of the screen.

MIDI In

MIDI Pads

Specifies which MIDI channel is used to trigger pads and sequences. If a channel

selected here is also chosen as the MIDI IN channel for a pad, that pad will also

play notes in response to signals received on this MIDI channel. See the section

Use MIDI Devices with Blackbox

below for more information.

When set to

Omni

, pad hits and sequences can be triggered by all MIDI

channels. However, any MIDI channel that is assigned as the MIDI In for a pad or

as the MIDI Keys parameter will be excluded from the list of channels that will

trigger pad hits.

MIDI Program Change messages received on this channel will be processed by

the blackbox if the

ProgChange

parameter is set to ON.

Page 84 of 106

Blackbox User Manual 1.7

Summary of Contents for Blackbox











































































































Search results

Summary of Contents for Blackbox

Reviews:

Related manuals for Blackbox

Brands by name

Popular brands

1010music Blackbox, User Manual

Search results

Summary of Contents for Blackbox

Reviews:

Related manuals for Blackbox

Brands by name

Popular brands