1010music Blackbox User Manual Download Page 26

Page: 26 / 106

Parameter Description

Range of Values

Mod

Target?

MIDI In

Specifies a MIDI channel to be used

to play this pad chromatically or

sliced across keys. This channel is

also used for MIDI modulation of

some parameters.
More than one pad can be assigned

to the same MIDI channel. In this

case, all assigned pads will be

triggered.
Any MIDI channel that is mapped to

a pad using this parameter no

longer triggers any events for MIDI

parameters set to OMNI.
Modulation sources PTCH (pitch

bend), MODW (Modulation Wheel),

MVOL (Volume control), and MPAN

(Pan control) follow this channel

assignment.
See the section

Use MIDI Devices

with Blackbox

below for more

information.

None

Ch1

through

Ch16

MIDI Out

Specifies a MIDI Channel that will

be used to send out notes when this

pad is triggered. When this pad is

triggered using notes, the

corresponding note will be sent out

on the specified MIDI channel. If

this pad is triggered as a pad hit,

the corresponding pad note will be

sent out on this channel. If the Pad

Note is set to

Default,

this will be a

note in the range of 36-51.

Otherwise, the note specified in Pad

Note will be sent. Please note that

Sequences can also be assigned to

MIDI Outputs. See the section

Use

MIDI Devices with Blackbox

below

for more information about MIDI

Outputs.

None

Ch1

through

Ch16

Pad Note

Controls which MIDI note on the

MIDI Pads channel will trigger

playback of this pad.

Default

C#-1

through

C#-1 maps to MIDI Note Number 1.

Note:

►

The remaining parameters are specific to each Pad Mode (sample,

multi-sample, clip, slicer or granular). We will discuss each Pad Mode

individually in the next sections.

Page 26 of 106

Blackbox User Manual 1.7

Summary of Contents for Blackbox











































































































Search results

Summary of Contents for Blackbox

Reviews:

Brands by name

Popular brands

1010music Blackbox, User Manual

Search results

Summary of Contents for Blackbox

Reviews:

Brands by name

Popular brands