manualshive.com logo in svg

1010music Bitbox Micro 1.0.7, User Manual

Share
Download
1010music Bitbox Micro 1.0.7 User Manual Download Page 42

4.

On the Preset Management screen, touch File and then Clean to delete any
unused WAV files in the preset folder. This will permanently remove these
WAV files from the microSD card.

If you are recording WAVs to build up a library of sounds:

1.

Create a new preset to host the content from your recording session.

2.

Record into pads as desired. Bitbox micro places the WAVs into the preset’s
folder.

3.

You can optionally use your computer to move the WAV files from the preset’s
folder on the microSD card into sound library folders on the card. When you
want to use these files in another preset, point to the WAV files you moved to
the library folders. Then pack up those presets to preserve copies of the
WAVs you used.

Note:

► Bitbox micro won’t stop you from loading a WAV file from Preset B’s folders into

Preset A. However, if you do this, you could potentially break Preset A if you ever
move or rename Preset B for any reason. Therefore, if you have WAV files that
you want to re-use across presets, we encourage you to move these WAV files
into library folders outside of the \Presets folder, and to Pack your presets often.

► If you record into a loaded pad, the original WAV file remains intact on the

microSD card and a new WAV file is created.

► If you have

RecToPlay

set to

ON

, bitbox micro will automatically start playing the

new sample when recording ends if the Length parameter was used for
recording.

► Bitbox micro streams the recording directly to your microSD. The length of your

recording is limited to the space available on the microSD card.

► Use the

Resam

input option to layer recordings, apply effects or capture new

clips.

Copyright 1010music LLC 2020

Page 42 of 88

Bitbox Micro User Manual 1.0.7

Summary of Contents for Bitbox Micro 1.0.7

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands