Bitbox 2.5 User’s Manual
7/17/19 11:13:00 AM
Copyright 1010music LLC 2019
Page 19 of 42
Digital Heart – Analog Soul
Parameter
Description
Range of Values
Mod
Target?
Start
Point where playback will begin when playing
forward or ends when playing in reverse.
Expressed in samples.
0 to
number of samples in the file
Yes
LpStr
Point where the looping will begin when playing
forwards, or looping will end when playing in
reverse. Expressed in samples. Must be before or
equal to LpEnd.
0 to
number of samples in the file
Yes
Len
When Loop Mode is None, how long the sample
will play past the value of the Start parameter.
Expressed in samples.
0 to
number of samples in the file
Yes
LpEnd
Point where the looping will end when playing
forwards, or looping will begin when playing in
reverse. Expressed in samples. Must be after or
equal to LpStr.
0 to
number of samples in the file
Yes
You can also set the values for
Start
,
LpStr
,
Len
, and
LpEnd
from the Waveform screen. When viewing the waveform, the
pink frame on the large waveform represents the
Start
and
Len
parameters. You can move these end points by turning the
top two control knobs. If
Loop Mode
is set to
Forward
or
Bidirect
, you will also see a white frame that defines the
Loop
Start
and
Loop End
points. Use the bottom two control knobs to adjust these end points. The corresponding values for the
end points are displayed above and below the large waveform. The sensitivity of the control knobs depends on the Zoom
level. Zoom out to make big adjustments then zoom in to make fine adjustments.
Work with a Clip Cell
Use Clip mode for WAV files where you want to use synchronized loops and quantized
playback for the entire WAV file. Clip mode works well with drum loops between one and
eight measures long. This is the only cell mode that supports quantization. An example of
a file that works well with Clip mode is
\Loops\Sine Saw Square Rhyth
.
The following parameters are specific to Clip mode:
Parameter
Description
Range of Values
Mod
Target?
Loop Mode
Controls whether the WAV file plays in a loop. The
whole WAV file will be played in the loop for Clip
cells. Only forward looping is supported with Clip
cells.
On
,
Off
No
Clip Cell Parameters Screen
